How should the intelligent toilet cover be cleaned and maintained?
Purchase knowledge of intelligent toilet cover
1. Function detection:
When purchasing, each function of the product needs to be checked one by one, such as: multiple flushing methods, adjustable nozzle position, toilet seat heating function, 38℃ maximum limit, deodorization varies according to the strength of the use stage, automatic power saving and timing power saving can be set at the same time, and the water pressure can be adjusted during cleaning, etc., try to keep the product on the basis of energy saving, safety, convenience and comfort.
2. Is it easy to clean:
Observe the surface carefully, see if it is flooded under the light, and then touch the surface with your hand. It should be smooth, smooth, and crystal-colored; there are no obvious needle holes, glaze deficiency and cracks; if you hit the surface lightly, the sound will be crisp and pleasant, there will be no cracking sound, and the appearance will not be deformed.
3. The higher the safety factor, the better: When purchasing, you must check whether the national standards are met and require the presentation of relevant documents and materials.
4. After-sales service is also very important:
Smart toilets are technological products and are very troublesome to maintain. When purchasing, you must ask clearly about the warranty period and detailed terms.
Maintenance of smart toilet cover
1. Do not place it in direct sunlight, near direct heat sources, or exposed to oil smoke, otherwise it will cause discoloration.
2. The cover plate and seat ring should be cleaned with soft cloth. It is prohibited to use strong acids, strong carbon and detergent powder to clean. Do not use volatiles, diluents or other chemicals to clean, otherwise the surface will be corroded. Do not use sharp objects such as wire brushes, blades, etc. to clean them.
3. Do not place hard or heavy objects, such as water tank covers, flower pots, buckets, basins, etc., otherwise the surface will be scratched or cracked.
4. When the cover plate is installed in a water-free or low-water tank, people should not lean back, otherwise it will cause breakage.
5. The cover should be opened and closed gently to avoid direct collision with the water tank and leaving spots that affect the appearance; or may cause breakage.
6. When using metal seat hinges (metal wires), be careful not to allow acid- and alkaline solvents to adhere to the product, otherwise it will easily rust.
Cleaning of smart toilet covers
1. The patterned wooden covers need special maintenance and cleaning and can only be cleaned with gentle detergents (such as dish detergent).
2. Do not allow abrasive chemicals and cosmetics (such as nail polish and aftershave) to directly contact the toilet cover as they can damage the surface.
3. Do not put the cover with movable soft foam ring toilet seat cushion in the dishwasher, clothes dryer or other hot cleaning appliances to clean.
4. After rinsing, wipe dry with a soft towel, and then dry the cover to ensure that the key parts are completely dry.
5. You can use dishwasher detergent and water to clean the cover, or use a special detergent for toilet cover, and wash it with a soft sponge or rag.
6. If you remove the toilet cover, consider using a large basin to help clean it.